Power Audio Amplifier based on STK400xx

This is Power Audio Amplifier circuit based on STK400xx series. It's will give you very good quality of sound this circuit is unexpensive too since STK40xx series have low price. It is easy we make a power amplifier using only few external components. The STKxxxx amplifiers, for them we will find in enough eponymous stereo amplifiers , but also in enough activety loudspeakers. They do not need a lot of special knowledge of manufacture, only that attention in pins, in order to they do not break, and one good power supply.

Schematic Diagram:

Component Part list

R1-4 =1Kohm R2= 33Kohm R3-8=100ohm R5= 0.22ohm 5W R6=10ohm 2W R7= 6,8ohm 2W R9=12Kohm R10=10Kohm R11= 680ohm C1=560 pF 100V ceramic or mylar C2-7 =1 uF 63V MKT

C3-12 =220 uF 63V C4-5-10 =100 pF C6-9 =47uF 63V C8 =100 nF 100V MKT C11 =1 nF 100V MKT C13 =100 uF 25V C14=10pF 100V ceramic or mylar L1 =3μH [15 turns of 1mm around R6] 100V ceramic or mylar F1-2 =2A Fuse fast IC1=STK4036......STK4044

STK40xx Series:

STK 4036 > Supply: ±35V - ±53,5V; Power (8R load): 50W
STK 4038 > Supply: ±40V - ±58V; Power (8R load): 60W
STK 4040 > Supply: ±43V - ±63V; Power (8R load): 70W
STK 4042 > Supply: ±46V - ±67V; Power (8R load): 80W
STK 4044 > Supply: ±51V - ±74V ; Power (8R load): 100V